The Custom Weld X-Caliber Edition is a
custom boat from the ground up. This is a boat specifically designed
for the shallow water application and the theory of ‘I may go over a few
rock bars or log jams on accident’. This boat is equipped to get you in
and to get you out. With large load capabilities, pack out game or load
it with friends and family. X-Caliber has full camper canvas that
breaks down and stores in the high deck compartment. The
top can be used
in many different configurations, from full enclosure to just front
cover. The X has a bench seat in the rear on the 70 gal cross fuel tank
with a removable pad for comfort and when things get muddy you can
remove it along with the motor cover pad. The motor cover pad makes a
great bed for when you have your camper canvas up or take it off when
you need to haul a quad or your big game. It also has a one piece high
deck with gas struts. Driver and passenger seating, jockey box, and
stereo. The X also comes with a front and
rear winch system to pull you
out when things don’t end up as planned. The winch is prewired to run
from the driver seat or a remote system if you need to be out of the
boat when winching it back to deeper water. This is a light weight but
very effective system to get unstuck (especially if you’re boating
alone). The
bottom of the boat is a huge key to making the X what it is.
It has a custom built tunnel in the boat to elevate the pump off the
bottom of the boat so when running shallow you don’t stuff the grate
with rocks or debris. It’s also comes with high caliber ½ inch UHMW to
protect the bottom of the boat. The UHMW also allows the boat to slide
over things easier than raw aluminum. The X is equipped with stomp
grate,
full swim platform, and ski tow. The whole
profile of the X is
different; with a lower profile and sit down and stand up driving style
boat. With a high mount throttle control and a tilt
steering wheel,
sitting and standing are very comfortable. It also has a full grab rail
around the windshield frame for support and holding on. The X has a 6.0L
engine and an American Turbine 203 w SDR as the standard pump. Pump
upgrades are available. The X has full side paint and custom graphic to
set it apart from the rest. It comes with a custom tandem axle Gateway
trailer. More options are available upon request.
This boat is designed for those who
want to explore and get away from it all. Go farther and run shallower
than you have gone before with the NEW Custom Weld X-Caliber…
This boat is currently available for
viewing and sale at Coach Works RV and Marine in Nisku, Alberta, Canada.
All specifications subject to
change.